Torpedo tank car dismantling machine
3.1 Purpose
The ILB320 mixer car dismantling machine is mainly suitable for the removal of refractory lining inside the iron water tank of a 320 ton torpedo shaped mixer car in an ironmaking plant. The operation scope covers various parts of the tank body without leaving any dead corners. The operation tool is a hydraulic crushing hammer, and it can also be equipped with some work tool heads such as hooks and rakes for other auxiliary operations.
3.2 Technical parameters and specifications
Overall dimensions (transportation status) 11 × two point nine × 3.1 (long × wide × Height) m
Overall weight: 25 tons
Power source: diesel engine, hydraulic pump
Hydraulic oil cooling form: forced cooling by oil motor
Diesel engine model: Cummins 6BTA5.9-C180
Whole vehicle drive mode: fully hydraulic drive
Walking mode: tracked self-propelled
Hydraulic crushing hammer: SB30
Impact energy: approximately 1000 joules
Impact frequency: 600-1100bmp
Drive oil pressure: 90-120Bar
Drive oil volume: 25-50l/min
Drill rod diameter: φ fifty-three
Hydraulic system form: full power variable displacement dual pump+external mobile operating system
Pilot pressure: 2.7-3.5Mpa
Upper turning speed: 6rpm (when the engine speed is 1800rpm)
Hydraulic hammer rotation speed: 10.2-44rpm
Traveling speed: 0-2.5km/h
Large climbing ability: 26 °
Boom pitch angle: ± 15 °
Telescopic arm rotation angle: ± 95 °
Hydraulic hammer rotation angle: 360 ° continuous
Upper turning angle: 360 ° continuous
Hydraulic hammer swing angle: up 10 °, down 90 °
Horizontal compensation stroke of the boom: 1000mm
Hydraulic hammer compensation stroke 500mm
Secondary telescopic arm stroke: 2200mm
Large working radius of secondary telescopic arm: 6m
Large ground clearance 450mm
Hydraulic oil tank volume: 700L
Working arm horizontal axis height: 3000mm